Call Us 770-405-1060

SFS Intec 1-1/2

SFS Intec 1-1/2" TW-S Fasteners for Cladding-to-Wood, TRESPA® METEON® LUMENS

review
0
0
5
Your Price: $49.40
Product SKU:94

Choose Options

Trespa® Color
L05.0.0 ATHENS WHITE
L05.1.2 BARCELONA BEIGE
L06.5.1 ITALIAN GREIGE
L09.6.4 INDIA BROWN
L11.4.4 ARIZONA RED
L21.5.1 LONDON GREY
L25.8.1 NEW YORK GREY
L90.0.0 METROPOLIS BLACK

Brand:

SFS Intec

Type:

Construction Metal Screws

Made In:

USA

SFS TWS-D12 fasteners are designed specifically for fastening wall cladding products & facades to wood.

  • Aesthetic fastening system for attachment to timber battens, dimensional lumber, plywood and OSB
  • 304 Austentic Stainless Steel for maximum corrosion resistance
  • Low profile TORX
  • Perfect match for all Trespa colors (custom colors or unpainted also available)
  • 10-12 x 1.50"
  • Packaged 250pcs per box

SPECIFICATIONS:

Drive:TORX T20W
Head Diameter:492-.453"
Thread Major Diameter:.194-.188"
Thread Minor Diameter:.134"-.129"
Nominal Tensile Strength:1596 lbs
Minimal Torsional Strength:60 lb-in
Nominal Shear Strength:1214 lbs


Pull-Out Strength SYP Dimensional Lumber

  • 1/4"=481 lbs

Pull-Out Strength - Plywood

  • 3/4"=578 lbs
  • 5/8"=438lbs
  • 1/2"=348lbs

Pull-Out Strength- OSB

  • 23/32"=449lbs
  • 19/32"=412lbs
  • 7/16"=228lbs

INSTALLATION RECOMMENDATIONS

  • Fastener length should provide for a minimum of 1" penetration into wood substrate
  • 0-2500 rpm screw gun recommended with depth sensing nosepiece
  • Use of T20W TORX Drive bit is required
  • Use of impact guns or hammer drills is not recommended

Reward Points

49 points will be rewarded to you when you buy this item.

Recently Viewed Items