Call Us 770-405-1060

SFS Intec 1-1/2

SFS Intec 1-1/2" TW-S Fasteners for Cladding-to-Wood, TRESPA® METEON® METALLICS

Your Price: $49.40
Product SKU:95

Choose Options

Trespa® Colors
M04.4.1 TITANIUM SILVER
M05.5.1 TITANIUM BRONZE
M06.4.1 AMBER
M12.4.2 GARNET RED
M20.4.2 NORTHERN LIGHT
M21.3.4 AZURE BLUE
M21.8.1 GRAPHITE GREY
M24.3.3 LAGOON
M34.3.1 BOTTLE GREEN
M35.7.1 MALACHITE GREEN
M40.4.3 MUSTARD YELLOW
M51.0.1 ALUMINUM GREY
M51.0.2 URBAN GREY
M53.0.1 COPPER RED
M53.0.2 COPPER YELLOW

Brand:

SFS Intec

Type:

Construction Metal Screws

Made In:

USA

SFS TWS-D12 fasteners are designed specifically for fastening wall cladding products & facades to wood.

  • Aesthetic fastening system for attachment to timber battens, dimensional lumber, plywood and OSB
  • 304 Austentic Stainless Steel for maximum corrosion resistance
  • Low profile TORX
  • Perfect match for all Trespa colors (custom colors or unpainted also available)
  • 10-12 x 1.50"
  • Packaged 250pcs per box

SPECIFICATIONS:

Drive:TORX T20W
Head Diameter:492-.453"
Thread Major Diameter:.194-.188"
Thread Minor Diameter:.134"-.129"
Nominal Tensile Strength:1596 lbs
Minimal Torsional Strength:60 lb-in
Nominal Shear Strength:1214 lbs


Pull-Out Strength SYP Dimensional Lumber

  • 1/4"=481 lbs

Pull-Out Strength - Plywood

  • 3/4"=578 lbs
  • 5/8"=438lbs
  • 1/2"=348lbs

Pull-Out Strength- OSB

  • 23/32"=449lbs
  • 19/32"=412lbs
  • 7/16"=228lbs

INSTALLATION RECOMMENDATIONS

  • Fastener length should provide for a minimum of 1" penetration into wood substrate
  • 0-2500 rpm screw gun recommended with depth sensing nosepiece
  • Use of T20W TORX Drive bit is required
  • Use of impact guns or hammer drills is not recommended

Reward Points

49 points will be rewarded to you when you buy this item.

Recently Viewed Items