Sealant Dow 795 Silicone Construction
Sealant Dow 795 Silicone Construction

Sealant Dow 795 Silicone Construction


Choose Options

White Dow 795 20oz Sausage Tube
Gray Dow 795 20oz Sausage Tube
Black Dow 795 20oz Sausage Tube


Dow Corning



Made In:


Dow Corning 795 silicone sealant consist of a single component, provide medium elasticity and is comprised of a neutral cure silicone architectural grade formula. Dow Corning 795 silicone sealer cures to a strong, yet flexible, silicone rubber joint seal and allows significant joint movement when applied according to the manufacturer's directions. This Dow 795 RTV architectural grade silicone caulking sealant easily applies in any weather and cures quickly at room temperature. Dow 795 silicone sealant, comprised of non-sagging silicone material, cures to a medium-modulus silicone rubber when exposed to moisture in the air. The Dow 795 series sealants can withstand ±50% movement of the original joint area when installed in an adequately designed weatherseal joint. In a properly designed structurally glazed joint, the sealant is strong enough to support glass and other panel materials under high windloads.

  • 20oz Sausage Tubes - Full case is 16 tubes
  • ± 50% joint width movement
  • Ideal RTV silicone sealant for building expansion joints
  • Structural and non-structural glazing and weathersealing of glass, metals, and plastic components

Dow Corning 795 Silicone Building Sealant meets the requirements of:

  • Federal Specification TT-S-001543A (COM-NBS) Class A for silicone building sealants
  • Federal Specification TT-S-00230C (COM-NBS) Class A for one component building sealants
  • ASTM Specification C 920 Type S, Grade NS, Class 50, Use NT, G, A and O
  • ASTM Specification C 1184 for structural silicone sealants
  • Canadian Specification CAN2-19.13-M82

ManufacturerDow Corning
Quantity1 cartridge
Contents10.3 fluid ounces
CompositionOne-part, neutral-cure, RTV silicone sealant
Indoor / Outdoor usageBoth
Tack-free time at 50% RH3 hours
Peel strength32 pounds per inch
Curing time at 50% RH7 - 14 days at 77 degrees F
Full adhesion14 -21 days
Flow, sag or slump.1 inches
Joint movement capability+/- 50%
Application temperature range< 122 degrees F
Working time20 - 30 minutes
Service temperature range-40 to 300 degrees F

There are no reviews for this product!

Related Items

Recently Viewed Items