Swenson custom cuts blades for every machine ordered, so allow 3-5 business days before your order ships.
For lead time information, please call us at 770-405-1060.
The Model 48 Heavy Duty Pivot Shear by Swenson Shear with its 48" blade is ideal for shearing heavy gauge exposed-fastener panels, with the ability to shear straight at 90° and up to a 8/12 gable. The custom blades match any panel profile, providing a clean cut, eliminating burred edges and flying metal. The shear is transportable and weighs around 140 lbs.
The Model 48 Shear features an interchangeable blade to accommodate any manufacturer's panel profile. Separate blades will be needed for each blade profile or to achieve various gable angles. The recommended maximum gauge thickness is 24. Shearing panels thicker than 24ga may increase wearing of blades.
*In order to achieve and angled cut (gable) or accommodate multiple panel profiles, the purchase of an additional blade set is required.
Straight Blade: Will shear straight at 90° and up to 2/12 gable
4/12 Gable: Achieve between 3/12 - 5/12 gable cuts
7/12 Gable: Achieve between 6/12 - 8/12 gable cuts
- Recommended Maximum Panel Thickness: 24 gauge
- Blade Length: 48 inches
- Ideal For: Light gauge exposed fastener panels, shear to length and Gable Ends, suggested maximum panel thickness, 24 gauge.
If you don't see your panel manufacturer listed, call us for assistance a 770-405-1060.