CorruBracket 100T Mini

$3.45

The CorruBracket 100T Mini is a bit shorter than its standard counterpart, the CorruBracket 100T and has two pre-punched holes in its base rather than four.

Quantity Pricing Price
1 - 49 $3.45
50 - 199 $3.29
200 - 499 $3.23
500+ $3.17
x

The CorruBracket 100T Mini is a bit shorter than its standard counterpart, the CorruBracket 100T and has two pre-punched holes in its base rather than four. The mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment just about anything! S-5!® mini brackets are not compatible with, and should not be used with, S-5!® SnoRail /SnoFence , or ColorGard, or X-Gard snow retention systems.

Having no messy sealants to apply, CorruBracket 100T Mini comes with a factory-applied EPDM rubber gasket seal already on the base, and the S-5!-patented reservoir conceals the EPDM from UV exposure, preventing UV degradation. The slotted top hole, which accommodates standard M8 nuts and bolts, simplifies alignment and maximizes flexibility in attaching ancillaries. A structural aluminum attachment bracket, CorruBracket 100T is compatible with most common metal roofing materials.

Because of the variety of possible applications, nuts and bolts are not included [available for separate purchase].

Installation is simple! CorruBracket 100T Mini is mounted directly into the crest of the corrugation, straddling the valley. No surface preparation is necessary; simply wipe away excess oil and debris, align, and apply. Secure directly into the crest of the corrugation by driving the appropriate screws into the pre-punched holes, or pre-drilling the proper-sized hole through the pre-punched holes and riveting.

CorruBracket 100T mini Product Brochure CorruBracket 100T mini Installation Guide CorruBracket 100T mini pdf CAD Drawing

Brand

S-5!

S-5!® Product Applications

S-5!® products have a solution for attaching anything to the metal roofs.

S-5! Snow Retention System from RapidMaterialsSnow Retention
S-5! snow retention system offers the most flexible configurations for any metal roofing profiles in the market. Easy to install, durable and safe.
S-5! for Solar Applications from RapidMaterialsSolar/PV Attachment
The new and improved S-5-PV Kit is the perfect marriage for photovoltaic power generation and metal standing seam roofs. With S-5!, you can attach an entire solar array with zero roof penetrations, maintaining the roof's integrity and warranty.
S-5! Windclamps from RapidMaterialsWind Clamps
S-5! application can dramatically improve wind uplift performance. In many cases patented S-5! WindClamps™ can double wind resistance for as little as $0.20 per square foot, preventing multiple modes of failure, including clip disengagement (when used at a clip location).
S-5! HVAC attachment from RapidMaterialsHVAC/Roof Top Equipment
Sometimes, a condensing or similar unit needs to be roof mounted but does not need to duct through the roof — it simply needs a place to sit. How do you mount it so that the panels are unharmed, and anchor it so that it doesn't move? S-5! is the solution. On other occasions, units and ducting can be frame mounted with S-5!.
S-5! Pipes & Conduits attachment from RapidMaterialsPipes/Conduits Attachment
Round shapes can also be mounted with S-5!, eliminating unsightly and corrosive wood blocking. Gas piping, electrical conduit, condensate lines—S-5! is the solution.
S-5! Clamps for Signage Attachment from RapidMaterialsSigns / Banners Mounting
Signs are securely mounted with no wood blocking, no holes in the panels, no leaks — and no problem when the next tenant moves in. Temporary advertising and information banners are easily installed and taken back down with no damage to panels.
S-5! Clamps for Utility Attachment from RapidMaterialsUtility Mounting
Attach almost any conceivable utility application, including: signs, banners, light fixtures, gas piping, antennas, roof walkways, HVAC equipment, lightning protection systems, condensate lines, stack/flue bracing, fascias, equipment screens, electrical conduit, antennas, cabling, access ladders, and more!
S-5! Clamps for Dishes/Antennas Mounting from RapidMaterialsSatellite Dishes / Antennas Mounting
Antennas, satellite dishes, lightning protection cabling, even holiday and rooftop lighting can all be mounted quickly and cost-effectively, permanently or temporarily with S-5! attachment solutions.

Roofing Mounting Solution for All Metal Roofs

Additional information

Weight 1.6 oz
Dimensions 3.5 × 1.48 × 1.25 in

Reviews

There are no reviews yet.

Be the first to review “CorruBracket 100T Mini”

Your email address will not be published. Required fields are marked *

The CorruBracket 100T Mini is a bit shorter than its standard counterpart, the CorruBracket 100T and has two pre-punched holes in its base rather than four. The mini is the choice for attaching all kinds of rooftop accessories: signs, walkways, satellite dishes, antennas, rooftop lighting, lightning protection systems, solar arrays, exhaust stack bracing, conduit, condensate lines, mechanical equipment just about anything! S-5!® mini brackets are not compatible with, and should not be used with, S-5!® SnoRail /SnoFence , or ColorGard, or X-Gard snow retention systems.

Having no messy sealants to apply, CorruBracket 100T Mini comes with a factory-applied EPDM rubber gasket seal already on the base, and the S-5!-patented reservoir conceals the EPDM from UV exposure, preventing UV degradation. The slotted top hole, which accommodates standard M8 nuts and bolts, simplifies alignment and maximizes flexibility in attaching ancillaries. A structural aluminum attachment bracket, CorruBracket 100T is compatible with most common metal roofing materials.

Because of the variety of possible applications, nuts and bolts are not included [available for separate purchase].

Installation is simple! CorruBracket 100T Mini is mounted directly into the crest of the corrugation, straddling the valley. No surface preparation is necessary; simply wipe away excess oil and debris, align, and apply. Secure directly into the crest of the corrugation by driving the appropriate screws into the pre-punched holes, or pre-drilling the proper-sized hole through the pre-punched holes and riveting.