PVKIT 2.0 EdgeGrab Original

$6.30

The new S-5! PVKIT 2.0 Edgegrab is used at all perimeter locations. Requires an S-5 mini clamp or bracket for attachment to the roof panel. Regular S-5! clamps may also be used.

UL 2703 Listed.

Quantity Pricing Price
1 - 49 $6.30
50 - 199 $6.00
200 - 499 $5.88
500+ $5.77
x
The S-5! PVKIT 2.0 EdgeGrab is used at all perimeter locations.
The Module Placement Bevel Guide makes the module placement easier. The mounting disk is multi-directional and rails are not required. The PV grab ears are broader for ease of installation and secure module engagement. For panel to panel connections, use the S-5! PVKIT 2.0 MidGrab.

PVKIT fits a wide array of module thicknesses. Use with S-5! mini clamps enables fitting to all standing seam metal roof profiles of any material. When paired with S-5! brackets, the PVKIT 2.0 also works on all trapezoidal ribbed and corrugated metal roofs. If desired, the PVKIT can also be used with regular S-5! clamps.

  • Modules can be easily installed from ridge-down or eave-up.
  • More slots for wire securement.

PVKIT 2.0 is UL 2703 Listed

S-5! Mini Clamps and Brackets are not included.
These mini clamps are recommended for use with the S-5-PV Kit 2.0 EdgeGrab: 
These Brackets can also be used with the S-5-PV Kit 2.0 EdgeGrab:

PV Kit 2.0 EdgeGrab Product Brochure PV Kit 2.0 EdgeGrab Installation Guide PV Kit 2.0 EdgeGrab pdf CAD Drawing PV Kit 2.0 Solar Manual

Brand

S-5!

S-5!® Product Applications

S-5!® products have a solution for attaching anything to the metal roofs.

S-5! Snow Retention System from RapidMaterialsSnow Retention
S-5! snow retention system offers the most flexible configurations for any metal roofing profiles in the market. Easy to install, durable and safe.
S-5! for Solar Applications from RapidMaterialsSolar/PV Attachment
The new and improved S-5-PV Kit is the perfect marriage for photovoltaic power generation and metal standing seam roofs. With S-5!, you can attach an entire solar array with zero roof penetrations, maintaining the roof's integrity and warranty.
S-5! Windclamps from RapidMaterialsWind Clamps
S-5! application can dramatically improve wind uplift performance. In many cases patented S-5! WindClamps™ can double wind resistance for as little as $0.20 per square foot, preventing multiple modes of failure, including clip disengagement (when used at a clip location).
S-5! HVAC attachment from RapidMaterialsHVAC/Roof Top Equipment
Sometimes, a condensing or similar unit needs to be roof mounted but does not need to duct through the roof — it simply needs a place to sit. How do you mount it so that the panels are unharmed, and anchor it so that it doesn't move? S-5! is the solution. On other occasions, units and ducting can be frame mounted with S-5!.
S-5! Pipes & Conduits attachment from RapidMaterialsPipes/Conduits Attachment
Round shapes can also be mounted with S-5!, eliminating unsightly and corrosive wood blocking. Gas piping, electrical conduit, condensate lines—S-5! is the solution.
S-5! Clamps for Signage Attachment from RapidMaterialsSigns / Banners Mounting
Signs are securely mounted with no wood blocking, no holes in the panels, no leaks — and no problem when the next tenant moves in. Temporary advertising and information banners are easily installed and taken back down with no damage to panels.
S-5! Clamps for Utility Attachment from RapidMaterialsUtility Mounting
Attach almost any conceivable utility application, including: signs, banners, light fixtures, gas piping, antennas, roof walkways, HVAC equipment, lightning protection systems, condensate lines, stack/flue bracing, fascias, equipment screens, electrical conduit, antennas, cabling, access ladders, and more!
S-5! Clamps for Dishes/Antennas Mounting from RapidMaterialsSatellite Dishes / Antennas Mounting
Antennas, satellite dishes, lightning protection cabling, even holiday and rooftop lighting can all be mounted quickly and cost-effectively, permanently or temporarily with S-5! attachment solutions.

Roofing Mounting Solution for All Metal Roofs

Additional information

Weight 17.12 oz
Dimensions 3 × 3 × 0.25 in

Reviews

There are no reviews yet.

Be the first to review “PVKIT 2.0 EdgeGrab Original”

Your email address will not be published. Required fields are marked *

The S-5 PV Kit 2.0 EdgeGrab is used at all perimeter locations.
The Module Placement Bevel Guide makes the module placement easier. The mounting disk is multi-directional and rails are not required. The PV grab ears are broader for ease of installation and secure module engagement. For panel to panel connections, use the S-5-PV Kit 2.0 MidGrab.

PV Kit fits a wide array of module thicknesses. Use with S-5! mini clamps enables fitting to all standing seam metal roof profiles of any material. When paired with S-5! brackets, the PV Kit 2.0 also works on all trapezoidal ribbed and corrugated metal roofs. If desired, the PV Kit can also be used with regular S-5 clamps.

  • Modules can be easily installed from ridge-down or eave-up.
  • More slots for wire securement.
S-5 Mini Clamps and Brackets are not included.
These clamps are recommended for use with the S-5-PV Kit 2.0 EdgeGrab: 
These Brackets can also be used with the S-5-PV Kit 2.0 EdgeGrab: