S-5-KHD Seam Clamp
The S-5-KHD clamp fits the very distinctive profiles of the Lysaght 406, McElroy Mirage, Metal Sales Clip Loc, and AEP-SPAN Klip-Rib.
The S-5-KHD is the most heavy-duty and durable clamp in the S-5!® family. Designed primarily for new construction, this clamp fits the very distinctive profiles of the Lysaght 406, McElroy Mirage, Metal Sales Clip Loc, and AEP-SPAN Klip-Rib. This clamp features an insert that is placed on the intermediate seam for extra hold. Significantly stronger than anything else on the market for these profile types, this clamp is geared for snow retention systems and other heavy duty applications in new construction where holding strength is critical. More strength means fewer rows of assembly, and roof warranties remain intact with zero penetration S-5!® technology.
- The S-5-K HD 3" insert is only for use on existing construction and placed at the eave. This is done by sliding it up into the seam. This installation can only achieve one row of snow retention.
- The S-5-K HD 6" insert is only to be used for new construction. The insert is snapped into the under side of the roof panel before installation. Care needs to be taken to avoid roof clip locations.
The S-5-KHD fits these seam profiles:
- LYSAGHT KLIP-LOK 406
- McElroy Metal Mirage
- AEP Span Klip-Rib
- Metal Sales Clip-Loc
- SpeedDeck SpeedDeck
- Safintra Saflok 410
- Safintra Saflok 700
- Domico GBS Domitec Dach
- And other similar profiles
The S-5-KHD clamp comes complete with four  3/8-24 x 0.50" setscrews and one  M8-1.25 x 16mm Hex Flange Bolt. All hardware is stainless steel. The insert is extrudeed aluminum.
The S-5-KHD Grip clamp has been tested for load-to-failure results by an independent lab. For roof panel specific test results
S-5!® Product Applications
S-5!® products have a solution for attaching anything to the metal roofs.
S-5! snow retention system offers the most flexible configurations for any metal roofing profiles in the market. Easy to install, durable and safe.
The new and improved S-5-PV Kit is the perfect marriage for photovoltaic power generation and metal standing seam roofs. With S-5!, you can attach an entire solar array with zero roof penetrations, maintaining the roof's integrity and warranty.
S-5! application can dramatically improve wind uplift performance. In many cases patented S-5! WindClamps™ can double wind resistance for as little as $0.20 per square foot, preventing multiple modes of failure, including clip disengagement (when used at a clip location).
|HVAC/Roof Top Equipment|
Sometimes, a condensing or similar unit needs to be roof mounted but does not need to duct through the roof — it simply needs a place to sit. How do you mount it so that the panels are unharmed, and anchor it so that it doesn't move? S-5! is the solution. On other occasions, units and ducting can be frame mounted with S-5!.
Round shapes can also be mounted with S-5!, eliminating unsightly and corrosive wood blocking. Gas piping, electrical conduit, condensate lines—S-5! is the solution.
|Signs / Banners Mounting|
Signs are securely mounted with no wood blocking, no holes in the panels, no leaks — and no problem when the next tenant moves in. Temporary advertising and information banners are easily installed and taken back down with no damage to panels.
Attach almost any conceivable utility application, including: signs, banners, light fixtures, gas piping, antennas, roof walkways, HVAC equipment, lightning protection systems, condensate lines, stack/flue bracing, fascias, equipment screens, electrical conduit, antennas, cabling, access ladders, and more!
|Satellite Dishes / Antennas Mounting|
Antennas, satellite dishes, lightning protection cabling, even holiday and rooftop lighting can all be mounted quickly and cost-effectively, permanently or temporarily with S-5! attachment solutions.
Roofing Mounting Solution for All Metal Roofs
3" Insert, 6" Insert