SnapClip II for ColorGard
An important component in ColorGard® snow retention systems.
An important component in ColorGard snow retention systems, the SnapClip is designed to prevent ice that forms on the metal panel's surface from sliding under the ColorGard assembly. Usually only required on the bottom row of ColorGard, the Snap-Clip features a rubber foot that prevents scratching or damage to the roof panels surface. The SnapClip is designed to be "snapped" onto the ColorGard cross-member after installation, therefore can be retrofit on in-place systems. One (1) SnapClip is recommended per panel.
Available in two sizes:
- Snap-Clip II fits roof panels with rib (seam) heights between 1" and 1-3/4". It may also be used on 2" vertical seamed panels, but not on 2" horizontally seamed panels.
- Snap-Clip III fits roof panels with rib (seam) heights from 1-3/4" to 3".
S-5!® Product Applications
S-5!® products have a solution for attaching anything to the metal roofs.
S-5! snow retention system offers the most flexible configurations for any metal roofing profiles in the market. Easy to install, durable and safe.
The new and improved S-5-PV Kit is the perfect marriage for photovoltaic power generation and metal standing seam roofs. With S-5!, you can attach an entire solar array with zero roof penetrations, maintaining the roof's integrity and warranty.
S-5! application can dramatically improve wind uplift performance. In many cases patented S-5! WindClamps™ can double wind resistance for as little as $0.20 per square foot, preventing multiple modes of failure, including clip disengagement (when used at a clip location).
|HVAC/Roof Top Equipment|
Sometimes, a condensing or similar unit needs to be roof mounted but does not need to duct through the roof — it simply needs a place to sit. How do you mount it so that the panels are unharmed, and anchor it so that it doesn't move? S-5! is the solution. On other occasions, units and ducting can be frame mounted with S-5!.
Round shapes can also be mounted with S-5!, eliminating unsightly and corrosive wood blocking. Gas piping, electrical conduit, condensate lines—S-5! is the solution.
|Signs / Banners Mounting|
Signs are securely mounted with no wood blocking, no holes in the panels, no leaks — and no problem when the next tenant moves in. Temporary advertising and information banners are easily installed and taken back down with no damage to panels.
Attach almost any conceivable utility application, including: signs, banners, light fixtures, gas piping, antennas, roof walkways, HVAC equipment, lightning protection systems, condensate lines, stack/flue bracing, fascias, equipment screens, electrical conduit, antennas, cabling, access ladders, and more!
|Satellite Dishes / Antennas Mounting|
Antennas, satellite dishes, lightning protection cabling, even holiday and rooftop lighting can all be mounted quickly and cost-effectively, permanently or temporarily with S-5! attachment solutions.
Roofing Mounting Solution for All Metal Roofs
|Dimensions||3 × 4 × 1 in|
An important component in ColorGard snow retention systems, the SnapClip is designed to prevent ice that forms on the metal panel’s surface from sliding under the ColorGard assembly. Usually only required on the bottom row of ColorGard, the Snap-Clip features a rubber foot that prevents scratching or damage to the roof panels surface.
Available in two sizes:
- Snap-Clip II fits roof panels with rib (seam) heights between 1″ and 1-3/4″. It may also be used on 2″ vertical seamed panels, but not on 2″ horizontally seamed panels.
- Snap-Clip III fits roof panels with rib (seam) heights from 1-3/4″ to 3″.
You can also downpoad printable information about ColorGard Snow Retention Systems: