SolarFoot
$4.18
The SolarFoot provides an ideal mounting platform to attach the L-Foot* of a rail-mounted PV system to the roof. This solution is The Right Way to secure rail-mounted solar systems to exposed fastener metal such as AG-Panel or R-Panel.
Introducing the new SolarFoot™ for exposed fastener metal roofing with the strength, testing, quality, and time-proven integrity you expect from S-5!.
The SolarFoot provides an ideal mounting platform to attach the L-Foot* of a rail-mounted PV system to the roof. This solution is The Right Way to secure rail-mounted solar systems to exposed fastener metal such as AG-Panel or R-Panel.
*L-Foot and fasteners not included. SolarFoot includes pre-attached 8mm stud and one 8mm hex nut.
Available fasteners for SolarFoot:
SolarFoot Features:
- Manufactured in the U.S.A. from certified raw material
- Fabricated in our own ISO 9001:2015 Certified factory
- All aluminum and stainless components
- 25yr limited warranty
- Compatible with all commercial L-Foot products on the market
- Factory applied 40-year isobutylene/isoprene crosslink polymer sealant for reliable weathertightness
- Sealant reservoir to prevent over-compression of sealant
- Load tested normal to seam
- Four points of attachment into structure or deck with tested holding strength for engineered applications
- Integrated with M8-1.25x17mm stud and M8-1.25 stainless steel hex flange nut included
The SolarFoot is a simple, cost-effective pedestal for L-Foot (not included) attachment of rail-mounted solar PV. The unique design is compatible with all rail producer L-Foot components. The new SolarFoot assembly ensures a durable weathertight solution for the life of the roof. Special factory applied butyl co-polymeric sealant contained in a reservoir is The Right Way, allowing a water-tested seal. Stainless integrated stud and hex flange lock-nut secure the L-Foot into position. A low center of gravity reduces the moment arm commonly associated with L-Foot attachments. Direct attachment of the SolarFoot to the structural member or deck provides unparalleled holding strength.
Solar Foot Advantages:
- Exposed faster mounting platform for solar arrays attached via L-Foot and Rails
- Weatherproof attachment to exposed fastener roofing
- Butyl sealant reservoir provides long-term waterproof seal
- M8-1.25x17mm stud with M8 hex flange nut for attachment of all popular L-Foot/rail combinations
- Tool: 13 mm Hex Socket or ½” Hex Socket
- Tool Required: Electric screw gun with hex drive socket for self tapping screws
- Low Center of Gravity reduces moment arm commonly associated with L-Foot/Rail solar mounting scenarios
- Attaches directly to structure or deck for optimal holding strength
- S-5! Recommended substrate specific e.g. steel purlin, wood 2×4, osb, etc fasteners provide excellent waterproofing and pull out strength
- Fastener through-hole locations comply with NDS (National Design Specification)
*Fasteners sold separately. Fastener type varies with substrate. L-Foot also sold separately.
SolarFoot Product Brochure SolarFoot Installation Guide SolarFoot pdf CAD Drawing
Brand
S-5!
S-5!® Product Applications
S-5!® products have a solution for attaching anything to the metal roofs.
![]() | Snow Retention S-5! snow retention system offers the most flexible configurations for any metal roofing profiles in the market. Easy to install, durable and safe. |
![]() | Solar/PV Attachment The new and improved S-5-PV Kit is the perfect marriage for photovoltaic power generation and metal standing seam roofs. With S-5!, you can attach an entire solar array with zero roof penetrations, maintaining the roof's integrity and warranty. |
![]() | Wind Clamps S-5! application can dramatically improve wind uplift performance. In many cases patented S-5! WindClamps™ can double wind resistance for as little as $0.20 per square foot, preventing multiple modes of failure, including clip disengagement (when used at a clip location). |
![]() | HVAC/Roof Top Equipment Sometimes, a condensing or similar unit needs to be roof mounted but does not need to duct through the roof — it simply needs a place to sit. How do you mount it so that the panels are unharmed, and anchor it so that it doesn't move? S-5! is the solution. On other occasions, units and ducting can be frame mounted with S-5!. |
![]() | Pipes/Conduits Attachment Round shapes can also be mounted with S-5!, eliminating unsightly and corrosive wood blocking. Gas piping, electrical conduit, condensate lines—S-5! is the solution. |
![]() | Signs / Banners Mounting Signs are securely mounted with no wood blocking, no holes in the panels, no leaks — and no problem when the next tenant moves in. Temporary advertising and information banners are easily installed and taken back down with no damage to panels. |
![]() | Utility Mounting Attach almost any conceivable utility application, including: signs, banners, light fixtures, gas piping, antennas, roof walkways, HVAC equipment, lightning protection systems, condensate lines, stack/flue bracing, fascias, equipment screens, electrical conduit, antennas, cabling, access ladders, and more! |
![]() | Satellite Dishes / Antennas Mounting Antennas, satellite dishes, lightning protection cabling, even holiday and rooftop lighting can all be mounted quickly and cost-effectively, permanently or temporarily with S-5! attachment solutions. |
Roofing Mounting Solution for All Metal Roofs

Additional information
Weight | 2.6 oz |
---|---|
Dimensions | 3.7 × 2 × 5 in |
Introducing the new SolarFoot for exposed fastener metal roofing with the strength, testing, quality, and time-proven integrity you expect from S-5!.
The SolarFoot provides an ideal mounting platform to attach the L-Foot* of a rail-mounted PV system to the roof. This solution is The Right Way to secure rail-mounted solar systems to exposed fastener metal such as AG-Panel or R-Panel.
*L-Foot and fasteners not included. SolarFoot includes pre-attached 8mm stud and one 8mm hex nut.
Available fasteners for SolarFoot:
SolarFoot Features:
- Manufactured in the U.S.A. from certified raw material
- Fabricated in our own ISO 9001:2015 Certified factory
- All aluminum and stainless components
- 25yr limited warranty
- Compatible with all commercial L-Foot products on the market
- Factory applied 40-year isobutylene/isoprene crosslink polymer sealant for reliable weathertightness
- Sealant reservoir to prevent over-compression of sealant
- Load tested normal to seam
- Four points of attachment into structure or deck with tested holding strength for engineered applications
- Integrated with M8-1.25x17mm stud and M8-1.25 stainless steel hex flange nut included
The SolarFoot is a simple, cost-effective pedestal for L-Foot (not included) attachment of rail-mounted solar PV. The unique design is compatible with all rail producer L-Foot components. The new SolarFoot assembly ensures a durable weathertight solution for the life of the roof. Special factory applied butyl co-polymeric sealant contained in a reservoir is The Right Way, allowing a water-tested seal. Stainless integrated stud and hex flange lock-nut secure the L-Foot into position. A low center of gravity reduces the moment arm commonly associated with L-Foot attachments. Direct attachment of the SolarFoot to the structural member or deck provides unparalleled holding strength.
Solar Foot Advantages:
- Exposed faster mounting platform for solar arrays attached via L-Foot and Rails
- Weatherproof attachment to exposed fastener roofing
- Butyl sealant reservoir provides long-term waterproof seal
- M8-1.25x17mm stud with M8 hex flange nut for attachment of all popular L-Foot/rail combinations
- Tool: 13 mm Hex Socket or ½” Hex Socket
- Tool Required: Electric screw gun with hex drive socket for self tapping screws
- Low Center of Gravity reduces moment arm commonly associated with L-Foot/Rail solar mounting scenarios
- Attaches directly to structure or deck for optimal holding strength
- S-5! Recommended substrate specific e.g. steel purlin, wood 2×4, osb, etc fasteners provide excellent waterproofing and pull out strength
- Fastener through-hole locations comply with NDS (National Design Specification)
*Fasteners sold separately. Fastener type varies with substrate. L-Foot also sold separately.
Available fasteners for SolarFoot:
Reviews
There are no reviews yet.