RapidMaterials

Sheet Metal Snips

Sheet metal snips, tin snips, pattern and combination snips; no matter what your need, we have them. We offer quality snips from Malco, Midwest, Freund, and Erdi.

Sheet Metal Snips

  • Sale! Midwest MWT-6510-R Offset Snip

    Midwest MWT-6510R Right Hand Offset Snips

    $15.75
  • Freund Hand Notcher 00371000 No 35

    Freund Hand Notcher 00371000 No 35

    $112.56
  • Sale! Malco Forged Steel Aviation Snip AV1

    Malco Forged Steel Aviation Snips

    $10.99 - $14.15
  • Sale! Malco AVM6/AVM7 "AVsMini" Aviation Snips - Offset Blades

    Malco AVM6/AVM7 “AVsMini” Aviation Snips – Offset Blades

    $11.53
  • Freund Offset Aviation Snips

    Freund Offset Aviation Snips

    $68.41 - $206.95
  • Sale! Malco Max2000 Aviation Snips

    Malco Max2000 Aviation Snips

    $25.03 - $37.07
  • Edma Hand Punch 00360010 for Sheet Metal

    Edma Hand Punch 00360010 for Sheet Metal

    $213.41
  • Sale! Malco M15 Forged Steel Pattern Snips

    Malco M15 Forged Steel Pattern Snips

    $59.50
  • Sale! Malco FCSR Fiber Cement Siding Snip

    Malco FCSR Fiber Cement Siding Snip

    $30.95
  • Sale!

    Malco MC12A “Andy” Classic Aluminum Handle Snip w/ Replaceable Blades

    $30.45
  • Sale!

    Malco M14A Replacement Blades

    $13.13
  • Sale!

    Malco M14A “Andy” Classic Aluminum Handle Snip w/ Replaceable Blades

    $30.45
  • Sale!

    Replacement Blades for Malco MV12 Combination Vinyl Snip

    $13.13
  • Sale!

    Malco M12 Replacement Blades

    $11.31
  • Sale!

    Malco M12A “Andy” Classic Aluminum Handle Snip w/ Replaceable Blades

    $32.94
  • Sale!

    Midwest MagSnip MWT-2110 for 24ga Steel & Vinyl

    $31.40
  • Sale!

    Replacement Blade Set for MWT-1200SV

    $6.30
  • Sale! Malco Vinyl Combination Snip - MV12

    Malco MV12 “Andy” Multi-Purpose Snips with Replaceable Blades29.9

    $29.94

Featured Roofing Product

Swenson Shear Model 48

The Model 48 Heavy Duty Pivot Shear by Swenson Shear with its 48" blade is ideal for shearing heavy gauge exposed-fastener panels, with the ability to shear straight at 90° and up to a 8/12 gable. The custom blades match any panel profile, providing a clean cut, eliminating burred edges and flying metal. The shear is transportable and weighs around 140 lbs.

The Model 48 Shear features an interchangeable blade to accommodate any manufacturer's panel profile. Separate blades will be needed for each blade profile or to achieve various gable angles. The recommended maximum gauge thickness is 24. Shearing panels thicker than 24ga may increase wearing of blades. 

Roofing Videos

Swenson Model 48 Pivot Shear

The Swenson Model 48 HD Pivot Shear is ideal for shearing heavy gauge exposed-fastener panels. Its 48" blade has the ability to shear straight at 90° and up to a 8/12 gable. Every Swenson Shear features an interchangeable blade; custom made in the United States to accommodate any manufacturer's panel profile.

Swenson Stone Coat Cutter

Referred to as the Swenson Shear “utility knife,” the Stone Coat Cutter is designed for use on a multitude of applications from stone coated metal shake and shingles, to 14-gauge stainless flat sheets. It is equipped with a 34-inch blade that is made of long lasting, high-carbon steel. This go-to tool is safe, efficient, and transportable with a weight of just  65 pounds.

We pride ourselves on providing expert advice based on decades of professional field experience. Whether it’s choosing the right tool for the job or calculating the correct material requirements, our experts are available to serve you.

Office Location

Atlanta, GA
Open M-F 8am-5pm

 

Contact Us

info@rapidmaterials.com
(770) 405-1060

 

info@rapidmaterials.com

(770) 405 - 1060