Round shapes can also be mounted with S-5!®, eliminating unsightly and corrosive wood blocking. For gas piping, electrical conduit and condensate lines, S-5! is the solution.
S-5-EF Flanged Mini Clamps$3.64 - $3.84
S-5-FA Flanged Mini Clamps$1.76 - $1.84
S-5-H Mini Seam Clamp$6.39 - $7.22
S-5-NH 1.5$5.43 - $5.75
S-5-NH 1.5 Mini$4.88 - $5.63
S-5-S Mini Seam Clamp$3.17 - $3.82
S-5-S Seam Clamp$4.99 - $5.29
S-5-T Seam Clamp$6.46 - $6.84
S-5-U Seam Clamp$6.35 - $6.65
S-5-USF Flanged Mini Clamps$5.57 - $5.91
S-5-ZF Flanged Mini Clamps$4.67 - $4.93
Mounting Pipes / Conduits on Metal Rooftop
Most model codes provide that if gas piping is run within the building envelope, the joints must be welded. If run on the rooftop, threaded joints may be used. There are significant cost differences in the two methods threaded joints are much more economical. It is also much easier (less labor-intensive) to install gas piping on a rooftop than overhead within a building. For this reason, gas piping is often roof-mounted.
Wood blocking is typically used to shim the piping above the panel seams. The long-term effects of wood blocking on coated steel roofs will void the roof s warranty. To keep the piping from migrating on the roof, all kinds of nasty things are done to the new roofs most of them involving the punching of holes in the panels and (temporary) externally applied sealants (which fail over time). The result is leak problems, repeated maintenance and warranty violations.
The S-5! solution: Gas piping is mounted above the panel seams using S-5! clamps. With S-5!, there is:
- No wood blocking
- No impediments to roof drainage
- No holes in the panels
- No leaks
- No maintenance
- No grief
Featured S-5! Product
S-5-S Seam Clamp
The S-5-S clamps are extraordinarily versatile clamps, specifically created for popular snap-together standing seam profiles. The S-5-S can be used to avoid having to crimp-seam profiles such as Firestone UC4 and New Tech Machinery SS550 and SS675. They also accommodate horizontal seams where the horizontal projection is under 0.54 inches without the need to double fold the seam!
Its simple design and ample size make it so strong and versatile it can be used with S-5!® snow retention products and other heavy-duty applications. The S-5-S clamp comes complete with two  3/8"x24 x 0.80" round nose set screws and one  M8-1.25 x 16mm Hex Flange Bolt. All hardware is stainless steel.
Only S-5! offers a comprehensive 25-YEAR MATERIALS AND WORKMANSHIP WARRANTY on ALL of its products. No one else in the industry even comes close!
Introducing the NEW S-5-N Clamp
The New S-5-N Seam Clamp is a the latest design from S-5! and features significant improvement over the original S-5-N seam clamp. The new design features an innovative insert that ensures a superior fit for new and wider nail strip profiles, as well as older ones.
We pride ourselves on providing expert advice based on decades of professional field experience. Whether it’s choosing the right tool for the job or calculating the correct material requirements, our experts are available to serve you.
Open M-F 8am-5pm
(770) 405 - 1060